SENTOSA 6.7  

AU $14,999 Make an offer
Finance
Length
22' - 6.70m
Location
Townsville QLD
Launch Year
1981
Hull Material
Fibreglass/GRP

Description: Sentosa 6.7
This is a lovely custom made Sentosa with like new trailer.

A great solid fibreglass trailer sailer, with a neat and tidy interior. There is a double V berth and 2 long single quarterberths. To ensure an enjoyable weekend on the water there are cooking facilities, a toilet and plenty of storage.

Initially built in Redcliffe, "Autumn" became well-known at Moreton Bay, as well as in Victoria and Queensland (Bribie Island), where she participated in regattas and races (with success). She then made her way to Townsville where her current owners have updated a lot of her equipment including the rigging.

Many new items were installed/replaced in 2019-2020 (see below).

The 22' trailer sailer concept for "Autumn" was brought about with a meeting between Doug McClintock and John Sharp, who had previously built a number of sail boats. Four molds were made and each boat was named after each of the four seasons, with appropriate coloured stripes: Winter (blue); Spring (green); Summer (red); and Autumn (maroon).

Autumn is known to be reasonably fast, roomy, easily towable and having a simple rig without back stays and runners.

The Swiftco trailer in very good condition (new 2019); dual axle; hydraulic brakes; folding jockey wheel; wobble rollers; spare wheel.
All tyres in very good condition. A fresh roadworthy certificate will be prepared for a potential new owner.

Please call in at the Slipways Townsville site to view this great boat

The above information has been compiled by TSBS from information provided by the owner, whilst all care is taken TSBS accepts no responsibility or liability for any errors or inaccuracies which may appear on this site. This information is to be used as a guide only. Purchasers need to make and rely on their own enquiries and independent expert advice.

Region
Queensland
Location
Townsville QLD
Usage
Family, Leisure
Launch Year
1981
Designer
Mund Mold
Builder
John Sharp and Doug McClintock
Length
22' - 6.70m
Beam
3.2M
Draft
Less than 1m
Displacement
1.4 approx
Keel / Ballast
Drop Centreboard
Hull Material
Fibreglass/GRP
Deck Material
Fibreglass
Engine Make
Tohatsu
Engine
New 9.6 hp Tohatsu outboard with less than 20 hours. Fully serviced 2023
Water
S/S Water Tanks
Accommodation
4 berths - 1 double V berth and 2 single quarterberths; reasonable headroom with pop-up
Galley
2 burner kero stove;
S/S sink (new 2019)
Esky refridgeration;
Dinette table - doubles as hotplate cover when not in use;
Cockpit table;
Toilet
Mascerator toilet
Covers
New boom cover and shade cover
Ground Tackle
2 x spinlock winches - new 2019/2020;
2 x Danforth anchors
Safety Gear
Epirb, fire extinguisher, flares, life vests (2 x new)
Electrics
New wiring 2019/2020

New batteries 2019
Electronics
Lowrance GPS and Depth Sounder; New trudeck compassi; Navico Tillerpilot (New 2020)
Sail Inventory
3 Dacron sails - No1, No 2, No 3
Mast / Rigging
Manufactured boom and new mast fittings (New 2019);
S/S rigging (New 2019);
Jammers (New 2019);
Lines (New 2019);


ABOUT THE SELLER

Townsville Slipways Pty Ltd
Crn Plume & Palmer Street
Townsville
QLD 4810 Australia






CONTACT THE SELLER

MORE BOATS FROM TOWNSVILLE SLIPWAYS PTY LTD
×