2019 SABRECRAFT MARINE CAMPER  

Overview
The latest in affordable family cruising and overnighting on the water, the Camper has been built up from the popular WB7400 Work Boat series

These are not plank boats, they are a true heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.2 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate

In fact, everything about these boats are truly Heavy Duty, Bollards, Toe Holds, Grab Rails, Boarding Ladder, Covers for the Bilge Pumps, Fuel Tank, Lifting Lugs, Console and we are always looking to improve

The rear area behind theseat is now recessed 50mm to allow for any water, fuel spills to concentrate within the bunded area for removal by the built in bilge pumps or if fuel spills, by hand

The paint is Marine Grade PU inside is White and the outside colour is your choice

Specifications
Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
Length OA: 7.40 meters
Width OA: 2.30 meters
Height OA: 0.75 meters
Large shower and toilet cubicle with maserater
Fresh water tank holding 300lt
Overhead canopy that can double as sleeping or storage
Side console steering
Kitchen cabinet with sink and fresh water
Esky platform with storage underneath
Flush mount anchor locker
Heavy duty bollards
Solar panel
120lt fuel tank
Fuel filter with water seperator
Twin deep cycle batteries
Battery isolator
Deck is finished with a non slip rubber membraneFloor structure is double plate fully welded with 100x50 RHS longitudinals & cross bracing
Lifting lugs fitted x 4
Navigation Lights: Forward
Deck is aluminium plate 4mm coated with non-slip rubber membrane
Approval 1: Survey AMSA - Domestic Commercial Vessel
Motor: Maximum 200hp (not included)
Colour -TBA Client's choice, single colour
Bilge Pumps: 2 x 2000 GPH
Warranty: Structural 5 years - Fittings 12 Months