2023 SABER 800 CC RIB - New Boat Library
Length
26' 3" - 8.00m
Model Year
2023
Hull Material
Aluminium
Description: Saber 800 CC RIB
The latest model in the saber range. This one has an extra 750mm added onto the rear deck to that extra space for fishing and hauling those loaded cray pots.
Designed and built for the fisherman in mind but finished to the level that will be the envy of all who travel on them.
Built in WA for the tough West Australian conditions, but not the harsh ride of a traditional plate aluminium boat. The Foam fenders dampen the ride in the toughest of conditions, but ther are also suspension seats to keep the ride enjoyable.
Huge fuel capacity of 4oo litres will give this boat an enviable range to get to and from those wide fishing spots.
The new 800 Centre console will also come standard with Capstan winch and removable stainless steel arm for retrieving the cray pots.
6mm Hull and sides and 4mm topside provide the strength needed to ensure these boats will last a lifetime. 23degree deadrise at the transom and 45degrees at the bow ensure the hull will cut through the water effortlessly.
The large centre console has room for a toilet inside making the boat more appealling for those long days out on the water.
Hull
o Overall length = 8.00m
o Registered length (excludes) swim platforms = 8.00m
o Beam = 2.55m
o Fuel tank capacity = 400 litres
o Weight = approximately 2 tonne (including fuel)
o Material = 6mm aluminum on hull and sides, 4mm on top side
o Deadrise angle = 23 degrees at rear and 45 degrees at bow
o Wide walk on gunnels - 185mm
o Top speed 45 - 50+ knots depending on engine size
o 6mm hull & side plate thickness
Seating
o Shockwave S5 suspension seats with custom race seats onto storage base x 2
o Drop down rear bench seat (3 person)
o Custom upholstery
Console
o Pop Out side windows
o Porta loo
o Huge aluminium T Top and rear shade to keep everyone protected from the sun.
Storage
o Lockers under seating in bow
o Locker under suspension bases
o Rear starboard locker (makes great fish locker)
o Side pockets under gunwales
Electronics
o Simrad 12" GPS
o Simrad S2009 Sounder
o VHF radio
o Audio system with Bluetooth stereo & speakers
o 1kw through hull transducer
o Underwater lights
o Deck lights to rear
o 600mm Curved light bar on roof
o LED navigation lights
o Electric anchor winch (drum type)
Engine
o Suzuki 350hp Duo prop with electronic controls ( Min HP 350hp- Max Hp 425)
o Power assist over hydraulic steering
Fishing
o Bait station with 3 x storage draws below & 4 x rod holders, 3 x drinks holders
o Electric reel power sockets x 4
o 1kw transducer
o 360 degree evolution push to lock gunnel mount rod-holders
o Starboard rear storage tank
Fender
o D section foam (maintenance free) with polyurethane fabric skin
o Rubbing strake x 2 rows
Rendering drawings as shown vary from the finished version.
Designed and built for the fisherman in mind but finished to the level that will be the envy of all who travel on them.
Built in WA for the tough West Australian conditions, but not the harsh ride of a traditional plate aluminium boat. The Foam fenders dampen the ride in the toughest of conditions, but ther are also suspension seats to keep the ride enjoyable.
Huge fuel capacity of 4oo litres will give this boat an enviable range to get to and from those wide fishing spots.
The new 800 Centre console will also come standard with Capstan winch and removable stainless steel arm for retrieving the cray pots.
6mm Hull and sides and 4mm topside provide the strength needed to ensure these boats will last a lifetime. 23degree deadrise at the transom and 45degrees at the bow ensure the hull will cut through the water effortlessly.
The large centre console has room for a toilet inside making the boat more appealling for those long days out on the water.
Hull
o Overall length = 8.00m
o Registered length (excludes) swim platforms = 8.00m
o Beam = 2.55m
o Fuel tank capacity = 400 litres
o Weight = approximately 2 tonne (including fuel)
o Material = 6mm aluminum on hull and sides, 4mm on top side
o Deadrise angle = 23 degrees at rear and 45 degrees at bow
o Wide walk on gunnels - 185mm
o Top speed 45 - 50+ knots depending on engine size
o 6mm hull & side plate thickness
Seating
o Shockwave S5 suspension seats with custom race seats onto storage base x 2
o Drop down rear bench seat (3 person)
o Custom upholstery
Console
o Pop Out side windows
o Porta loo
o Huge aluminium T Top and rear shade to keep everyone protected from the sun.
Storage
o Lockers under seating in bow
o Locker under suspension bases
o Rear starboard locker (makes great fish locker)
o Side pockets under gunwales
Electronics
o Simrad 12" GPS
o Simrad S2009 Sounder
o VHF radio
o Audio system with Bluetooth stereo & speakers
o 1kw through hull transducer
o Underwater lights
o Deck lights to rear
o 600mm Curved light bar on roof
o LED navigation lights
o Electric anchor winch (drum type)
Engine
o Suzuki 350hp Duo prop with electronic controls ( Min HP 350hp- Max Hp 425)
o Power assist over hydraulic steering
Fishing
o Bait station with 3 x storage draws below & 4 x rod holders, 3 x drinks holders
o Electric reel power sockets x 4
o 1kw transducer
o 360 degree evolution push to lock gunnel mount rod-holders
o Starboard rear storage tank
Fender
o D section foam (maintenance free) with polyurethane fabric skin
o Rubbing strake x 2 rows
Rendering drawings as shown vary from the finished version.
Model Year
2023
Length
26' 3" - 8.00m
Hull Material
Aluminium