2022 SABER 725 CABIN RIB - New Boat Library
Length
23' 9" - 7.25m
Model Year
2022
Hull Material
Aluminium
Description: Saber 725 Cabin RIB
Designed and built for the fisherman in mind but finished to the level that will be the envy of all who travel on them.
Built in WA for the tough West Australian conditions, but not the harsh ride of a traditional plate aluminium boat. The Foam fenders dampen the ride in the toughest of conditions, but ther are also suspension seats to keep the ride enjoyable.
Huge fuel capacity of 4oo litres will give this boat an enviable range to get to and from those wide fishing spots.
6mm Hull and sides and 4mm topside provide the strength needed to ensure these boats will last a lifetime. 23degree deadrise at the transom and 45degrees at the bow ensure the hull will cut through the water effortlessly.
The cockpit has sliding windows on both sides to ensure great ventilation when required and the cabin has the pop up glass hatch.
Hull
o Overall length = 7.25m
o Registered length (excludes) swim platforms = 6.75m
o Beam = 2.55m
o Fuel tank capacity = 400 litres
o Weight = approximately 2 tonne (including fuel)
o Material = 6mm aluminum on hull and 4mm on top side
o Deadrise angle = 23 degrees at rear and 45 degrees at bow
o Wide walk on gunnels - 185mm
o Top speed 45 - 50+ knots depending on engine size
o 6mm hull & side plate thickness
o Italian designed
Seating
o Shockwave S5 suspension seats with custom race seats onto storage base x 2
o Drop down rear bench seat (3 person)
o Cabin internal seating
o Custom upholstery
Cabin
o Sliding side windows
o Forward roof overhang for extra shade
o Shade extension for extra shade over rear seat/bait board
Storage
o Lockers under V seating in bow
o Rear lockers
o Locker under suspension bases
o Rear starboard locker (makes great fish locker)
o Side pockets under gunwales
Electronics
o Simrad 12" GPS
o Simrad S2009 Sounder
o VHF radio
o Audio system with Bluetooth stereo & speakers
o 1kw through hull transducer
o Underwater lights
o Deck lights to rear
o 600mm Curved light bar on roof
o LED navigation lights
o Electric anchor winch (drum type)
Engine
o Suzuki 300hp with electronic controls ( Min HP 250hp- Max Hp 350)
o Power assist over hydraulic steering
Fishing
o Bait station with 3 x storage draws below & 4 x rod holders, 3 x drinks holders
o Electric reel power sockets x 4
o 1kw transducer
o 360 degree evolution push to lock gunnel mount rod-holders
o Starboard rear storage tank
Fender
o D section foam (maintenance free) with polyurethane fabric skin
o Rubbing strake x 2 rows
Rendering drawings as shown vary from the finished version.
Built in WA for the tough West Australian conditions, but not the harsh ride of a traditional plate aluminium boat. The Foam fenders dampen the ride in the toughest of conditions, but ther are also suspension seats to keep the ride enjoyable.
Huge fuel capacity of 4oo litres will give this boat an enviable range to get to and from those wide fishing spots.
6mm Hull and sides and 4mm topside provide the strength needed to ensure these boats will last a lifetime. 23degree deadrise at the transom and 45degrees at the bow ensure the hull will cut through the water effortlessly.
The cockpit has sliding windows on both sides to ensure great ventilation when required and the cabin has the pop up glass hatch.
Hull
o Overall length = 7.25m
o Registered length (excludes) swim platforms = 6.75m
o Beam = 2.55m
o Fuel tank capacity = 400 litres
o Weight = approximately 2 tonne (including fuel)
o Material = 6mm aluminum on hull and 4mm on top side
o Deadrise angle = 23 degrees at rear and 45 degrees at bow
o Wide walk on gunnels - 185mm
o Top speed 45 - 50+ knots depending on engine size
o 6mm hull & side plate thickness
o Italian designed
Seating
o Shockwave S5 suspension seats with custom race seats onto storage base x 2
o Drop down rear bench seat (3 person)
o Cabin internal seating
o Custom upholstery
Cabin
o Sliding side windows
o Forward roof overhang for extra shade
o Shade extension for extra shade over rear seat/bait board
Storage
o Lockers under V seating in bow
o Rear lockers
o Locker under suspension bases
o Rear starboard locker (makes great fish locker)
o Side pockets under gunwales
Electronics
o Simrad 12" GPS
o Simrad S2009 Sounder
o VHF radio
o Audio system with Bluetooth stereo & speakers
o 1kw through hull transducer
o Underwater lights
o Deck lights to rear
o 600mm Curved light bar on roof
o LED navigation lights
o Electric anchor winch (drum type)
Engine
o Suzuki 300hp with electronic controls ( Min HP 250hp- Max Hp 350)
o Power assist over hydraulic steering
Fishing
o Bait station with 3 x storage draws below & 4 x rod holders, 3 x drinks holders
o Electric reel power sockets x 4
o 1kw transducer
o 360 degree evolution push to lock gunnel mount rod-holders
o Starboard rear storage tank
Fender
o D section foam (maintenance free) with polyurethane fabric skin
o Rubbing strake x 2 rows
Rendering drawings as shown vary from the finished version.
Model Year
2022
Designer
Westribs
Length
23' 9" - 7.25m
Beam
2.54
Hull Material
Aluminium
Deck Material
EVA Foam
Engine Make
Suzuki
Horse Power
300
Fuel
400
Ground Tackle
Electric Drum anchor winch
Bilge Pumps
Two Automatic Bilge pumps
Electrics
Simrad 12" GPS, Simrad S2009 Sounder, VHF Radio, Simrad Sonic Hub, JL Audio Speakers, 1KW Thru Hull transducer, LED underwater lights, Rear Deck lights, LED Cabin Lights, 6oomm Curved Light bar, LED anchor and navigation lights, Electronic Helm with power steering. 4 x Electric reel Andersen plugs
Remarks
Bait station with 3 storage lockers, 360 Degree revolution push to lock gunwale mount rod holders.
D section Foam Collars with Polyurethene skin.
2 x Rubbing strake
shockwave Suspension seats
Fold down rear seat
Shade Extension over rear deck
Top speed 45-50+ knots depending on outboard option
D section Foam Collars with Polyurethene skin.
2 x Rubbing strake
shockwave Suspension seats
Fold down rear seat
Shade Extension over rear deck
Top speed 45-50+ knots depending on outboard option